Fire Frets / Fronts; Interior Panels; Facias. Search results for: 'streamline 2 manual' Search Go. GAS FIRE I am after an. Looking for the servicing and installation instructions for a Sirocco Streamline 2 Live Fuel Effect. Hi, i have a manual that i am happy to copy and forward to anyone that wants one. I am also looking to purchase embers and coals. Hi please help I would appreciate a copy of the streamline 2 manual. Random video: It has basic controls for orienting and fitting Samsung Gt- P3100 Usb Driver, zooming, and Schulschrift Font Free Download, and it displays slideshows.

1. $2 Gas Prices
2. Studio 2 Gas Fire

• A combustible shelf may be fixed to the wall above the fire, providing that it complies with the dimensions given in section 3 site requirements. No purpose provided ventilation is normally required for this appliance. The requirements of other appliances operating in the same space or room, and the results of a spillage test must be taken into consideration when assessing ventilation requirements, this will have been carried out by your Gas Safe registered installer. • The main burner should light after a few seconds, to decrease the setting to LOW, turn the control knob clockwise to the low setting. To turn to the PILOT position from the HIGH or LOW positions, press the control knob in, and return to the pilot position and release. • OPERATING THE APPLIANCE (Remote control) IMPORTANT USER INFORMATION – AFTER INSTALLATION BY THE ENGINEER, READ THIS BEFORE ATTEMPTING TO OPERATE THE FIRE Insert the batteries in the TESC Control and handset as show inside the battery cover and slide isolation switch to the I position of gas control Hold the handset and the green unlock light will illuminate allowing the buttons to work. • Press and hold in the power symbol button and release immediately when the word pilot appears at the bottom left of the display( after about 1-2 seconds).

• Setting the temperature display to Celsius or Fahrenheit. Press and release the + or - button to toggle between C and F. When the display shows the desired symbol, press and releases the “SET” button to store. As the important settings above have now been done. Press and hold (not releasing straight away) the “SET”.

• Section 3: APPLIANCE INFORMATION Streamline 16' Tray 18' Tray Gas Group G20 Natural Gas CAT I2H G20 Natural Gas CAT I2H Inlet Pressure 20 mbar 20 mbar Max Input (gross) Min Input (gross) Setting Pressure 20 mbar 20 mbar Gas Inlet connection 8mm Compression 8mm Compression Overall Height. • SECTION 4: VENTILATION This Appliance does not normally require purpose provided ventilation. However, if a second appliance operating within the same room or space must be taken into consideration when assessing ventilation. When commissioning the appliance spillage is detected, then amongst other problems there may be insufficient natural ventilation for correct operation of the flue. • The area immediately above the outlet must form a smooth path into the flue. Any type of fire surround used with this appliance must be adequately sealed to the wall and floor; a combustible shelf may be fixed to the wall above the fire, providing that it complies with the dimensions given below. • Section 6: DEBRIS SPACE In accordance with BS 5871 part 2, minimum debris collection volumes are required behind the installed appliance when used with the appropriate hotbox or convector box.

CLAY/CEMENT LINES OR BLOCK FLUE WHICH IS NEW, UNUSED, OR PREVIOUSLY ONLY USED WITH A GAS FIRE. • SECTION 7.1: PREPARING THE OPENING Before installing the fire, check the flue for correct operation using a smoke pellet, all of the smoke should be drawn up the flue and exit correctly from the terminal.

The appliance is designed to fit most types of fireplaces with a natural draught flue as listed in the Installation Requirements. • OPENING THE APPLIANCE Stand the carton the right way up, open the box from the top. Read all the instructions before continuing to unpack or install this appliance.

• Setting the temperature display to Celsius or Fahrenheit. Press and release the + or - button to toggle between C and F. When the display shows the desired symbol, press and releases the “SET” button to store. As the important settings above have now been done.

$2 Gas Prices

• OPERATING THE APPLIANCE (Remote control) IMPORTANT USER INFORMATION – AFTER INSTALLATION BY THE ENGINEER, READ THIS BEFORE ATTEMPTING TO OPERATE THE FIRE Insert the batteries in the TESC Control and handset as show inside the battery cover and slide isolation switch to the I position of gas control Hold the handset and the green unlock light will illuminate allowing the buttons to work. • Press and hold in the power symbol button and release immediately when the word pilot appears at the bottom left of the display( after about 1-2 seconds). The fire will light. To Adjust the flame hold the handset to enable the buttons to work and press and the - button to reduce the flame. • Quick start user instructions Fire Control This control is situated on your fire.

• Pilot flame shrinks when fire is on high? Poor gas flow to fire, check pressure with fire on high. If pressure is low, remove any restriction in pipe work or valve. Check all isolators are adequately sized and fully open. Check meter pressure is adequate. • SECTION 18: USER INSTRUCTIONS IMPORTANT NOTES The installation of this fire MUST only be carried out by a competent person (such as a Gas Safe registered fitter) in accordance with the Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards, Codes of Practice, the Building Regulations and the manufacturers’. • A combustible shelf may be fixed to the wall above the fire, providing that it complies with the dimensions given in section 3 site requirements.

Remove the cardboard packing pieces, and any other bags or boxes containing fittings or other parts. • INSTRUCTIONS CONTENT Section Contents Page No Important Notes Installation requirements Appliance Information Ventilation Site Requirements Pre-Fabricated Flue box Debris Space Installation of appliance 10-11 Preparing the Opening 11/12 Fitting the Burner Tray 12/14 Fuel Bed 15-18 Commissioning the Appliance Operating the Appliance Manual Control 10.1 Operating the Appliance Remote Control 19-20. • Section 1: IMPORTANT NOTES This fire is decorative Fuel Effect Gas Fire providing radiant warmth. It is designed to operate on Natural Gas or LPG. It is the LAW that all gas appliances and fittings are installed by a competent person such as a Gas Safe Registered fitter and in accordance with the Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards for Installation, Codes of Practice and in accordance with the manufacturers’.

Issue; 21/10/11.

• Model Streamline 3 Model Options Apex, Blenheim, Pinnacle Plus, Grace, Soho, Liberty and Manual & Remote Installation and User Instructions All instructions must be handed to user for safekeeping This is not a DIY product and must be installed by a Gas Safe registered. • INSTALLATION INSTRUCTIONS These Notes Must Be Read Before Installation This appliance is an Inset Live Fuel Effect appliance that provides radiant or combined radiant and convected heat; it cannot and should not be used as the main heating source within a property.

Thanks, Linda.

• SECTION 7.2 FITTING THE BURNER TRAY Temporarily fit the burner tray and ensure a suitable gas route can be achieved. If the fire is the manual control system, you can now place the burner tray into the base plate making sure that the back lugs locate properly into the back of the plate. Fit the two securing screws through the front plate ensuring that the plate is in front of the front edge of the base plate, if using a Hotbox or Convector box then ensure the base plate is behind the plate on the box. • Remote Control options will need the 3 x AA batteries (Ever Ready Energisers alkaline battery maybe used or Lithium type batteries can be used) to be placed within the valve compartment and 2 x AA batteries for the hand set.

• INSTRUCTIONS CONTENT Section Contents Page No Important Notes Installation requirements Appliance Information Ventilation Site Requirements Pre-Fabricated Flue box Debris Space Installation of appliance 10-11 Preparing the Opening 11/12 Fitting the Burner Tray 12/14 Fuel Bed 15-18 Commissioning the Appliance Operating the Appliance Manual Control 10.1 Operating the Appliance Remote Control 19-20. • Section 1: IMPORTANT NOTES This fire is decorative Fuel Effect Gas Fire providing radiant warmth. It is designed to operate on Natural Gas or LPG.

Studio 2 Gas Fire

Keep it held to keep the control unlocked, to enable operation of the buttons. 3) Setting the time the display will be as shown, as the time is not set yet and will progress automatically to the next screen shown below. • 4) Setting the display for 12 or 24 Hour display As always when pressing the remote control buttons keep the control held to keep the green light on and therefore handset safety feature, unlocked.

Note: Fitting the batteries incorrectly could lead to damaging your control box. • Now place 4 coals across the back and four coals across the front these may vary in size and shape also you can over hang the cast edges of the tray to help fill in the outer areas of the opening, leave a gap close to the pilot to help with cross lighting. • Now Place the next rows as shown below, coals may be rotated slightly within their positions to give a good visual effect.

• BEFORE CONTACTING SIROCCO FOR SERVICE PLEASE READ THE FOLLOWING; Sirocco is committed to customer care and service. To ensure we provide the best service we can we have a policy to charge for all none warranty home visits so that all customers with a genuine manufactures fault can be dealt with swiftly, if your appliance has recently been installed and you are experiencing any of the following. • SIROCCO Sp. Zo.o Nad Lasem 8, Zelecow, 96-321 Zabia Wola, Poland.

• The following are not covered by this extended warranty: paint work in the fire chamber, fire fronts, and decorative trims, ceramic components, glass and batteries, electronic or electric/mechanical components such as remote controls. Issue; 21/10/11.

Remove the bags containing ceramic components such as coals or gravel etc. Remove the cardboard packing pieces, and any other bags or boxes containing fittings or other parts. • INSTRUCTIONS CONTENT Section Contents Page No Important Notes Installation requirements Appliance Information Ventilation Site Requirements Pre-Fabricated Flue box Debris Space Installation of appliance 10-11 Preparing the Opening 11/12 Fitting the Burner Tray 12/14 Fuel Bed 15-18 Commissioning the Appliance Operating the Appliance Manual Control 10.1 Operating the Appliance Remote Control 19-20. • Section 1: IMPORTANT NOTES This fire is decorative Fuel Effect Gas Fire providing radiant warmth. It is designed to operate on Natural Gas or LPG. It is the LAW that all gas appliances and fittings are installed by a competent person such as a Gas Safe Registered fitter and in accordance with the Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards for Installation, Codes of Practice and in accordance with the manufacturers’.

• SECTION 14: BRIEFING THE CUSTOMER All instructions must be handed to the user for safekeeping. Show the customer how to light and operate the fire. After commissioning the appliance, the customer should be instructed on the safe use of the appliance and the informed for the need of regular servicing. • SECTION 15: SERVICING Isolate the fire from the gas supply.

• Mode In Range of the fire Man = Manual If missing out of Zzz = Snooze range or fire Therm = Thermostat switched off Timed Day of the Week Room Time (12 or 24hr) Temperature Fire Status Handset Battery Indicator Unlocked if RC = Handset Illuminated. • Operating instruction (Detailed) 1) Upon successful insertion of the batteries in the Handset (if the handset has not previously paired) the display will be as shown if it has been paired already then go to No 3. 1a) If display is not as above the handset may well need to be reset before pairing. Press and Hold “Set”.

• Model Streamline 3 Model Options Apex, Blenheim, Pinnacle Plus, Grace, Soho, Liberty and Manual & Remote Installation and User Instructions All instructions must be handed to user for safekeeping This is not a DIY product and must be installed by a Gas Safe registered. • INSTALLATION INSTRUCTIONS These Notes Must Be Read Before Installation This appliance is an Inset Live Fuel Effect appliance that provides radiant or combined radiant and convected heat; it cannot and should not be used as the main heating source within a property. The appliance is designed to fit most types of fireplaces with a natural draught flue as listed in the Installation Requirements. • OPENING THE APPLIANCE Stand the carton the right way up, open the box from the top. Read all the instructions before continuing to unpack or install this appliance. Remove the bags containing ceramic components such as coals or gravel etc.

3) Setting the time the display will be as shown, as the time is not set yet and will progress automatically to the next screen shown below. • 4) Setting the display for 12 or 24 Hour display As always when pressing the remote control buttons keep the control held to keep the green light on and therefore handset safety feature, unlocked. The H indicates that it is time to set the timer to either 24 hour display or 12 Hour (AM or PM) display. • Setting the temperature display to Celsius or Fahrenheit.

CLAY/CEMENT LINES OR BLOCK FLUE WHICH IS NEW, UNUSED, OR PREVIOUSLY ONLY USED WITH A GAS FIRE. • SECTION 7.1: PREPARING THE OPENING Before installing the fire, check the flue for correct operation using a smoke pellet, all of the smoke should be drawn up the flue and exit correctly from the terminal. If problems are found DO NOT fit the fire until corrective measures have been completed. Protect the decorative hearth whilst aligning the tray within the opening part of the packaging or a dust sheet can be used. • SECTION 7.2 FITTING THE BURNER TRAY Temporarily fit the burner tray and ensure a suitable gas route can be achieved. If the fire is the manual control system, you can now place the burner tray into the base plate making sure that the back lugs locate properly into the back of the plate. Fit the two securing screws through the front plate ensuring that the plate is in front of the front edge of the base plate, if using a Hotbox or Convector box then ensure the base plate is behind the plate on the box.

The Sirocco Streamline range of gas fires are more efficient than similar decorative gas fires but still have a very natural look. From a gas input of 6.9 kW the fire will produce about 3kW of heat output. The gas fire comes with a 'Hot Box', which is basically a fire-back in a metal case. This allows less heat to escape up the chimney and the ceramic fibre inner cladding allows only a little little heat to be lost to the space behind the fireplace.

• Press and hold in the power symbol button and release immediately when the word pilot appears at the bottom left of the display( after about 1-2 seconds). The fire will light. To Adjust the flame hold the handset to enable the buttons to work and press and the - button to reduce the flame. • Quick start user instructions Fire Control This control is situated on your fire. The drawing shows the main features of the control. The control required 3 x AA size alkaline batteries to be inserted under the battery compartment cover.

The fire will light. To Adjust the flame hold the handset to enable the buttons to work and press and the - button to reduce the flame. • Quick start user instructions Fire Control This control is situated on your fire. The drawing shows the main features of the control. The control required 3 x AA size alkaline batteries to be inserted under the battery compartment cover. The orientation of these is shown moulded into the battery compartment.

Check meter pressure is adequate. • SECTION 18: USER INSTRUCTIONS IMPORTANT NOTES The installation of this fire MUST only be carried out by a competent person (such as a Gas Safe registered fitter) in accordance with the Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards, Codes of Practice, the Building Regulations and the manufacturers’.

Spare parts and accessories for Sirocco fires and Winther Browne gas fires You can order and purchase spare parts by selecting the model of fire from the drop down box at the top of the page, if you need assistance you can call us on 084 or by emailing us using the Help & Contact at the top of the page.

• The area immediately above the outlet must form a smooth path into the flue. Kingdom hearts 2 english rom. Any type of fire surround used with this appliance must be adequately sealed to the wall and floor; a combustible shelf may be fixed to the wall above the fire, providing that it complies with the dimensions given below. • Section 6: DEBRIS SPACE In accordance with BS 5871 part 2, minimum debris collection volumes are required behind the installed appliance when used with the appropriate hotbox or convector box. CLAY/CEMENT LINES OR BLOCK FLUE WHICH IS NEW, UNUSED, OR PREVIOUSLY ONLY USED WITH A GAS FIRE. Nch debut 4.00 code. • SECTION 7.1: PREPARING THE OPENING Before installing the fire, check the flue for correct operation using a smoke pellet, all of the smoke should be drawn up the flue and exit correctly from the terminal. If problems are found DO NOT fit the fire until corrective measures have been completed. Protect the decorative hearth whilst aligning the tray within the opening part of the packaging or a dust sheet can be used.